Mobil Jet Oil 254
Trast Aerosupermarket (Aquiline Internationl Goup of Companies) stocks large quantity of Mobil Jet Oil 254 at its premises at Sharjah International Airport Free Zone (SAIF Zone) available for immediate delivery worldwide.
UAE Phone: +971 (6) 5570710, International phone: +8 835 1000 124 3547 e-mail: 
Sale Mobil Jet Oil 254
Mobil Jet Oil 254 is formulated to meet the demanding requirements of latest technology aircraft-type gas turbines operating over a wide range of severe operating conditions. When compared to a typical Type II lubricant, Mobil Jet Oil 254 reduces bulk oil oxidation by up to 50 percent and shows deposit control capability 50 F higher. These properties have been confirmed in various laboratory tests including; the Corrosion-Oxidation Stability Test, Alcor Deposition Test, Vapor Phase Coker, Erdco High-Temperature Bearing Test, Ryder Gear and the Mobil Thin Film Oxidation Test.
The closely controlled low-temperature viscosity of Mobil Jet Oil 254, along with its low pour point (below -54 ºC), ensure good low-temperature fluidity to permit starting and lubrication at temperatures as low as -40 ºC. In extensive laboratory testing and in-flight experience, Mobil Jet Oil 254 also exhibits excellent bulk oil stability at temperatures up to 232 ºC (450 ºF) for extended periods. The evaporation rate at these temperatures is low enough to prevent excessive loss of volume. The load-carrying ability of Mobil Jet Oil 254 comes from its synthetic base stock viscosity and, therefore, is not subject to loss from viscosity index additive shear. The lubricant has excellent resistance to foaming.
Typical Properties
| cSt @ 40ºC (102 ºF) | 26.4 |
| cSt @ 100ºC (212 ºF) | 5.3 |
| cSt @ -40 C (-40 ºF), % change @ -40 ºC after 72 hours | 11,500, -2.2 |
| Pour Point, ºC (ºF), ASTM D 97 | -62 (-80) |
| Flash Point, ºC (ºF), ASTM D 92 | 254 (489) |
| Fire Point, ºC (ºF) | 288 (550) |
| Autogenous Ignition Temp, ºC (ºF) | 399 (750) |
| TAN (mg KOH/g sample) | 0.08 |
| Specific Gravity | 1.0044 |
| Evaporation Loss, % | |
| 6.5 hr @ 204 ºC, 29.5" Hg | 2.1 |
| 6.5 hr @ 232 ºC, 29.5" Hg | 7.4 |
| 6.5 hr @ 232 ºC, 5.5" Hg (Equals pressure @ 40,000 Ft. altitude) | 25.2 |
| Foam, ml | |
| Sequence I, 24 ºC | 0 |
| Sequence II, 93.5 ºC | 10 |
| Sequence III, 75ºC (after 200 F test) | 0 |
| Foam Stability, after 1 min settling, ml | 0 |
| Rubber Swell | |
| F Rubber, 72 hr @ 204 ºC, % | 20.8 |
| H Rubber, 72 hr @ 70 ºC, % | 20.0 |
| Sonic Shear Stability, KV @ 40 C, change, % | 0.7 |
| Ryder Gear, average lb/in, % Hercolube A | 2,715, 114 |
Download MSDS Mobil Jet Oil 254 THE TOXICITY OF COMMERCIAL JET OILS Mobil Jet Oils - Equipment Builder Reference Guide World Jet Fuel Specifications World Jet Fuel Specification old
* Evaluation Mobil Jet
* Viscosity
* Advantages Mobil Jet Oil 254
* Three Jet Oils
* Oil Lifetime
Mobil Jet Oil 254 - Synthetic oil is a third-generation, extra high performance, synthetic aircraft-type gas turbine lubricant engineered to meet the performance requirements for gas turbine engines.
OUR BEST OFFER!
TRAST Aerosupermarket
